hstx

High Speed Data Acquisition over HDMI - RP2350 HSTX implementation

Firmware for the TV-Top Kiosk HDMI stick (RP2040/RP2350)

Pokémon Emerald ported to the RP2350. No emulator, 60 fps HDMI output. Recompiled for Cortex-M33.

DVI for RP2350 HSTX (Adafruit Arduino library)

A PCB to neatly package a rp2350b with two 12bit high speed adc and four channel audio input for use with hsdaoh

PCB to neatly package a Raspberry Pi Pico 2 with an AD9226 12bit ADC and PCM1802 for capture with HSDAOH

Duke Nukem 3D on the RP2350 — HDMI video, Adlib/SB audio, USB + NES/SNES/Wii gamepads, game data streamed from SD card. Runs on Fruit Jam, Murmulator M2, or a self-built breadboard/PCB setup.

NEC PC Engine / TurboGrafx-16 / PC Engine CD emulator for RP2350-based microcontrollers

Galagino for RP2350 boards with DVI/HDMI output: Pac-Man, Galaga, Donkey Kong, Frogger, Dig Dug and 1942, ported from Till Harbaum's Galagino and built on the pico_shared framework. ROM sets not included.

1943: The Battle of Midway and 1943 Kai arcade emulator for RP2350 boards with DVI/HDMI output, ported from MAME's 1943 driver and built on the pico_shared framework. ROM sets not included.

Commodore 64 and 128 emulator for RP2350 boards with HDMI/DVI and an SD card

Dragon's Lair laserdisc arcade emulator for RP2350 boards with DVI/HDMI output, after MAME's driver and Hypseus' LD-V1000, built on the pico_shared framework. ROM and laserdisc image not included.

Phoenix (Amstar, 1980) arcade emulator for RP2350 boards with DVI/HDMI output, ported from MAME's Phoenix driver and built on the pico_shared framework. ROM set not included.

This SparkFun Arduino Library enables support for DVI output via the HSTX connect on SparkFun RP2050 Boards

Doom for RP2350 boards with HSTX video: Adafruit Fruit Jam, Pico 2 + DVI breakout, Murmulator M2, Feather RP2350 — HDMI/I2S audio, USB HID input

Moon Cresta arcade emulator for RP2350 boards with DVI/HDMI output, ported from MAME's Galaxian driver and built on the pico_shared framework. ROM set not included.

Salamander and Lifeforce (Konami, 1986) for RP2350 boards with PSRAM and HDMI output

DevilutionX (Diablo) for RP2350 boards with 8 MB PSRAM and 16 MB flash: HDMI output, SD card, USB and gamepad input

RP2350/LVDS over HSTX pixel backend: panel timing and scanout, a 4bpp indexed framebuffer, a sixteen-colour palette, the drawing core, and one target seam a board implements.