Repository navigation
Expand file tree
/
Copy pathREADME.txt
More file actions
51 lines (40 loc) · 1.91 KB
/
Copy pathREADME.txt
File metadata and controls
51 lines (40 loc) · 1.91 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
BUSPLAN-CE – TI-84 Plus CE Program
==================================
Description
-----------
BUSPLAN-CE is a TI-84 Plus CE program designed to help transit planners, schedulers, or trainees determine the number of buses required on a route to maintain a given headway. The program uses the total round trip time (T), a layover time expressed as a percentage (L), and the desired headway (H) to calculate the total cycle time and determine how many buses are needed to maintain the planned service frequency.
Variables Used
--------------
| Variable | Description | Units |
|----------|--------------------------------------------------|-------------|
| T | Round trip time (driving time only) | Minutes |
| L | Layover time as a percentage of T | Percent (%) |
| H | Headway (desired interval between buses) | Minutes |
| B | Number of buses required (rounded to nearest 0.1)| Buses |
How to Use the Program
----------------------
Once the program is running:
- Enter the round trip time (T) in minutes when prompted.
- Enter the layover time as a percentage of the round trip time (L).
- Enter the desired headway (H) in minutes.
- The program will calculate and display the number of buses required, rounded to the nearest 0.1 bus.
- Press [ENTER] to clear and exit.
Example
-------
A bus route takes 60 minutes to complete a round trip.
Planned layover time is 15% of the round trip.
You want a 10-minute headway between buses.
Run the program and input:
RTime= 60
LayOv= 15
HdWay= 10
You’ll see:
Buses= 6.9 req'd
Explanation:
Layover time is 15% of 60 → 9 minutes
Total cycle time = 60 + 9 = 69 minutes
69 ÷ 10 = 6.9 buses
Notes
-----
- The result is rounded to one decimal place, allowing for flexibility in planning.
- This program automatically clears variables when finished and resets the home screen.